stevielewis
Junior Dragster Champion
Is that....?! What I think that is....?
Posts: 341
|
Post by stevielewis on May 3, 2018 6:37:25 GMT -6
I'm sure somewhere this has been addressed but I don't seem to be able to find it. What is the outside diameter of the popular 1/24, 1/25 scale sparkplug boot tubing? I don't have any in my supplies so I can't measure it. Any help with this will be appreciated. Thanks.
As a side note, without purchasing aftermarket items, what do you use for wheel valve stems, wire or plastic? what size diameter and length?
|
|
|
Post by 41chevy on May 3, 2018 11:03:00 GMT -6
The boot material I use is .032 black or red "live rubber" tube that I got at a fly fishing store for fly making. I myself use K&S brass .020 wire for tire valve stems. Costs about 25 cent for a 12inch piece. I cut to the length I want, file the end flat and with the brass wire I can bend 45 or 90 degrees or leave it straight. Paul
|
|
stevielewis
Junior Dragster Champion
Is that....?! What I think that is....?
Posts: 341
|
Post by stevielewis on May 3, 2018 14:30:48 GMT -6
Thanks, Paul. That's the information I needed.
|
|